SAVE THESE TIPS FOR TOP RESULTS
1. Prep surface by scuff sanding, priming, and/or painting. We used Annie Sloan Chalk Paint in Athenian Black.
2. Measure the surface(s) to be decoupaged.
3. Draw your measurements on the back of the wallpaper with a pencil. If cutting several pieces, number each one.
4. Lay the wallpaper, print side down, on a cutting mat. Placing your knife against the edge of the ruler, press
firmly as you cut along your pencil lines.
5. Apply a thin, even layer of glue, using a craft brush to get in the corners.
6. Carefully lay the wallpaper in place. Using a squeegee, pressing outward to remove any air bubbles.
7. Apply a clear topcoat if desired. If using Fine & Dandy Atelier substrate, no topcoat needed.
Time to celebrate!
%20to%20be%20decoupaged.3.%20Draw%20your%20measurements%20on%20the%20back%20of%20th...){kind=link}